How To Remove Dissolved Oxygen From Water

how-to-remove-dissolved-oxygen-from-water

Share This Post

Four common techniques can be used to remove dissolved oxygen (DO) from water, both chemically and mechanically. These techniques include boiling water at 1 atm (atmospheric pressure), boiling water under reduced pressure, nitrogen (N) purging, and sonication under reduced pressure. 

Dissolved oxygen (DO) is the amount of oxygen present in water. We can easily measure the amount of DO in water with a DO probe and sensor. Measuring DO is important because oxygen (O2) plays a key role in many industries, like wastewater treatments and aquaculture systems because of the dramatic shifts that can occur in the chemical, biological, and ecological processes. 

However, O2 can be a harmful substance which is why removing DO is an essential step to prevent corrosion in boilers and pipes in power plants, and to improve heat transfer, increasing efficiency. However, removing DO from water is not only essential in power plants. The food, pharmaceutical, biotechnology, and semiconductor industry also require reducing or removing DO from water. 

Removing Dissolved Oxygen From Water

We can easily increase dissolved oxygen in water by bubbling it with air, however, decreasing or removing DO requires physical (mechanical) or chemical methods.

Physical techniques to remove DO from water:

  • Thermal degassing
  • Vacuum degassing 
  • Countercurrent Exchange

Chemical techniques to remove DO from water:

  • Nitrogen stripping
  • Using nutrients & plants

Thermal Degassing

Boiling at 1 atm:

When temperatures increase, the solubility of oxygen in the water is reduced, therefore we know that warmer water holds less DO than cold water. This is why boiling water is one way to reduce and remove DO from water. 

During the thermal gassing process, water is placed into a conical flask and boiled for 30 minutes on a hot plate in the open air. The water in the flask is then slowly poured into a bottle (usually plastic). Before the cap is tightly screwed onto the bottle, any remaining air is squeezed out of the bottle. With the cap tightly screwed on the bottle, it is then cooled under running tap water. This method is the least effective way to remove DO from water

Boiling under reduced pressure:

A hand vacuum pump allows water to be boiled under pressure. When water is boiled under reduced pressure the water requires less energy to change into a gas form and boiling can take place at a lower temperature making it more energy-efficient. 

Water is placed inside a Büchner flask and attached to a hand vacuum pump. A water trap is usually placed between the flask and the vacuum pump to prevent the pump from becoming damaged from the flask water. The water is then boiled for 30 minutes to remove the DO from the water. After the water has boiled the flask is sealed and is placed under running water to cool it down. 

Thermal Degassing

Vacuum Degassing

Sonification under reduced pressure:

This technique is similar to boiling under pressure, except the Büchner flask is placed in a sonic bath and sonicated for 30 minutes and 1 hour periods. 

For those that skipped physics class, sonication is related to Henry’s Law. When water is under pressure, it makes DO less soluble. Sonication and stirring solutions such as water under reduced pressure typically enhance the removal efficiency of DO. 

Sonication uses sound energy to shake the oxygen particles in the water, which are then removed through pressure reduction inside the specialized vacuum chamber, also known as a vacuum degasser.

Vacuum Degassing

Countercurrent Exchange

Mechanical removal of DO in the oil field involves using an oxygen-free gas such as methane (CH4) to strip the DO from the water via countercurrent contact exchange. Alternatively, if you want to chemically remove DO in the oil field, sulfur dioxide (SO2) or sodium sulfite (Na2SO3) is used because it is economically friendly. 

Nitrogen Purging/Stripping

Nitrogen purging, also known as nitrogen stripping, is an industrial process that eliminates unwanted gases and other impurities in water using nitrogen gas (N2). 

This method is the most effective O2 removal method. However, this method can be expensive as large amounts of N2 gas are needed, prompting new ways to reduce the amount of N2 gas in future DO removal.

Nitrogen Stripping

Using Nutrients & Plants

Another way to remove DO from water is to increase the nutrient concentration in the water. When nutrients increase in water, plant growth increases, and as plants utilize oxygen, DO levels in water decrease due to decomposition and respiration. 

Plants & Nutrients

Coupling Techniques

Coupling thermal degassing with vacuum degassing, and thermal degassing and nitrogen stripping have also been successful in removing DO in water.

The Future Of Removing Dissolved Oxygen From Water

With limitations, low efficiency, and high costs in many DO removal operations, it is necessary to develop more efficient methods to remove DO from water. 

Novel rotor-stator reactors (RSR) are capable of removing DO from water because it intensifies gas to liquid contact and the enhanced effect of nitrogen stripping and vacuum degassing under high gravity environments. 

Because technology is always advancing, a new electrochemical method of oxygen removal has been developed. This technique involves oxygen-rich water which flows through a three-dimensional cathode inside an electrochemical cell. The cathode removes the DO from the water and is then released in gas form into the air via the anode. This method is more efficient than physical methods and equally efficient to using chemical methods because of the low energy consumption and use of non-toxic deoxygenation chemicals

Conclusion

The most effective way to remove DO from water is via nitrogen stripping, however many industries are turning to “coupling techniques” to develop more efficient DO removal methods. 

If you would like to learn more about other water quality measurements, characteristics, or applications for dissolved oxygen, do not hesitate to contact our world-class team at Atlas Scientific.

Dissolved Oxygen Probes & Sensors

Subscribe To Our Newsletter

Get product updates and learn from the best!

More To Explore

how-to-calibrate-ezo-complete-tmp-using-atlas-desktop-software
Blog

How to calibrate the EZO Complete-TMP using the Atlas Desktop software

The Atlas Scientific line of EZO Complete circuits makes building a custom monitoring system easy, but if you don’t calibrate your sensors, then what good are your readings; And can you trust them? The accuracy of your readings is directly related to the quality of your calibration. Calibration is not difficult, and a little bit

how-to-calibrate-ezo-complete-dissolved-oxygen-using-atlas-desktop-software
Blog

How to calibrate the EZO Complete-Dissolved Oxygen using the Atlas Desktop software

The Atlas Scientific line of EZO Complete circuits makes building a custom monitoring system easy, but if you don’t calibrate your sensors, then what good are your readings; And can you trust them? The accuracy of your readings is directly related to the quality of your calibration. Calibration is not difficult, and a little bit

Want to learn more about our products?

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.