RTD 4-Wire Temperature OEM™ Circuit

#RTD-4-OEM

You may also like…

Not recommended for a new design; Call for purchasing.
Add & Save

QTY 1

$35.00

QTY 10

$31.70

QTY 25

$28.40

QTY 50

$23.45

QTY 75

$19.29

For those engineers tasked with mass-producing a device that needs accurate temperature sensing capabilities, the OEM-RTD is a quick and easy solution to a complex problem. This small 11×13 mm SMD component gives you the ability to accurately read from any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.  

RTDResistance Temperature Detector RTD
Reads Temperature in °C
Range -126.000 °C − 1254 °C
Resolution 0.001
Accuracy +/– (0.1 + 0.0017 x ̊C)
Response time 1 reading every 420ms
Supported probes Any type & brand PT-100 or PT-1000 RTD
Supported configuration 2 wire, 3 wire or 4 wire RTD
Calibration Single point
Data protocol SMBus/I2C
Default I2C address 0x68
Operating voltage 3.0V − 3.6V
Data formatASCII
Electrical Isolation not needed
Circuit dimensions 11.1mm x 13.3mm (0.43″ x 0.52″)
Weight0.56 grams

For those engineers tasked with mass-producing a device that needs accurate temperature sensing capabilities, the OEM-RTD is a quick and easy solution to a complex problem. This small 11×13 mm SMD component gives you the ability to accurately read from any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.  

RTDResistance Temperature Detector RTD
Reads Temperature in °C
Range -126.000 °C − 1254 °C
Resolution 0.001
Accuracy +/– (0.1 + 0.0017 x ̊C)
Response time 1 reading every 420ms
Supported probes Any type & brand PT-100 or PT-1000 RTD
Supported configuration 2 wire, 3 wire or 4 wire RTD
Calibration Single point
Data protocol SMBus/I2C
Default I2C address 0x68
Operating voltage 3.0V − 3.6V
Data formatASCII
Electrical Isolation not needed
Circuit dimensions 11.1mm x 13.3mm (0.43″ x 0.52″)
Weight0.56 grams

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.