Whitebox T5
#WB-T5
You may also like…
-
Sale!
-
Sale!
-
Sale!
-
Add & Save
|
4+ units |
$61.75 |
|
10+ units |
$60.10 |
|
25+ units |
$58.50 |
The Whitebox T5 carrier board was designed for the Raspberry Pi Zero and the Zero W.
The T5 has two ports for EZO sensors; One port is electrically isolated, while the other is not. This configuration is perfect for engineers who are building a small chemical monitoring device. Multiple T5 boards can be stacked on top of each other, adding an additional two or more ports to the Raspberry Pi.
• No wiring, no bread boards. • No soldering necessary.
• Works with all EZO devices / sensors. • Built in electrical isolation means that sensors won’t interfere
with each other, and removes outside electrical noise that can
interfere with readings. • 1 fully isolated port. • 1 non-isolated port. • I2C mode only • Whitebox T5 does not come with EZO™ class devices.
The Whitebox T5 carrier board was designed for the Raspberry Pi Zero and the Zero W.
The T5 has two ports for EZO sensors; One port is electrically isolated, while the other is not. This configuration is perfect for engineers who are building a small chemical monitoring device. Multiple T5 boards can be stacked on top of each other, adding an additional two or more ports to the Raspberry Pi.
• No wiring, no bread boards. • No soldering necessary.
• Works with all EZO devices / sensors. • Built in electrical isolation means that sensors won’t interfere
with each other, and removes outside electrical noise that can
interfere with readings. • 1 fully isolated port. • 1 non-isolated port. • I2C mode only • Whitebox T5 does not come with EZO™ class devices.
You may also like…
-
Sale!
-
Sale!
-
Sale!
-
