Industrial Monitoring Kit
#WF8-SIS
You may also like…
Add & Save
|
Volume discounts are not available for this product. |
|
|
|
|
|
|
|
The Industrial Monitoring Kit is a multi-parameter process monitor, capable of reading from eight probes at once. Real-time values are easily visible through the 4×40 character LCD display, with a simple and intuitive menu screen for calibration and temperature compensation. Real-time values can also be transmitted via 4-20mA signals or Serial data protocol. The modular design allows for the operator to quickly add in any combination of probes. This system can be used for basic water quality monitoring or integrated into a fully automated process control system.
The Industrial Monitoring Kit can be configured for Serial Data output or analog 4-20mA output.
Data output
Serial – RS232 data communication
4-20mA – Analog output
Data recording
Optional SD card for recording data in CSV format, SD card not included.
Probes, circuits, calibration & isolation
None – No probes, circuits, calibration solutions, and isolators
Fully loaded – Comes with 1x EZO-pH, 1x EZO-ORP, 1x EZO-DO, 1x EZO-EC
and 3x EZO-RTD, their respective industrial probes, calibration solutions,
4x isolators, and 8x Male BNC Connectors with Terminal Screws.
If you choose “Fully Loaded” option, you will not need to include additional isolators.
Isolators
Choose the amount of isolators that you’ll need.
The following sensors need isolation:
pH, ORP, D.O. & EC
Please contact us for any questions or quotes.
Monitor up to Eight (8) different sensors at one time.
Supports: pH, ORP, DO, EC, RTD, Flow, CO2, O2, Pressure & Humidity
SD card data recording with time stamp On-board calibration and temperature compensation
Real-time displayed values.
RS232 Serial Data output 4-20mA output for PLC process control for each channel.
24V power supply included
The Industrial Monitoring Kit is a multi-parameter process monitor, capable of reading from eight probes at once. Real-time values are easily visible through the 4×40 character LCD display, with a simple and intuitive menu screen for calibration and temperature compensation. Real-time values can also be transmitted via 4-20mA signals or Serial data protocol. The modular design allows for the operator to quickly add in any combination of probes. This system can be used for basic water quality monitoring or integrated into a fully automated process control system.
The Industrial Monitoring Kit can be configured for Serial Data output or analog 4-20mA output.
Data output
Serial – RS232 data communication
4-20mA – Analog output
Data recording
Optional SD card for recording data in CSV format, SD card not included.
Probes, circuits, calibration & isolation
None – No probes, circuits, calibration solutions, and isolators
Fully loaded – Comes with 1x EZO-pH, 1x EZO-ORP, 1x EZO-DO, 1x EZO-EC
and 3x EZO-RTD, their respective industrial probes, calibration solutions,
4x isolators, and 8x Male BNC Connectors with Terminal Screws.
If you choose “Fully Loaded” option, you will not need to include additional isolators.
Isolators
Choose the amount of isolators that you’ll need.
The following sensors need isolation:
pH, ORP, D.O. & EC
Please contact us for any questions or quotes.
Monitor up to Eight (8) different sensors at one time.
Supports: pH, ORP, DO, EC, RTD, Flow, CO2, O2, Pressure & Humidity
SD card data recording with time stamp On-board calibration and temperature compensation
Real-time displayed values.
RS232 Serial Data output 4-20mA output for PLC process control for each channel.
24V power supply included
