Atlas Scientific pH Kit
pH Kit
The Atlas Scientific pH Kit comes with everything you need to get your laboratory grade embedded pH system up and running.

Remember, a pH Sensor cannot be allowed to dry out or freeze. When it’s not in use keep it in the supplied soaker bottle. Periodically change out the storage solution in the soaker bottle with new storage solution.

• 1 pH Circuit
• 1 scientific grade silver / silver chloride pH Sensor.
• 3 125ml (4oz) calibration solutions (pH 4, pH 7 and pH 10)
• 1 125ml (4oz) pH storage solution
• 1 Pre-Assembled Female BNC connector
• 1 pH decal
Sensor Max PSI: 690 kPa (100PSI)

Female BNC Spec
Thread Size 1/2" - 28, UNEF Thread type
EZO™ pH Circuit DataSheet
Wiring Diagram
Raspberry Pi Sample Code
Arduino Sample Code
Arduino Mega Sample Code
PIC C Sample Code
BNC Technical Specs
Legacy Data Sheets
pH Circuit 1.0
pH Circuit 1.5
pH Circuit 1.6
pH Circuit 2.0
pH Circuit 2.5
pH Circuit 2.6
pH Circuit 2.6.1
pH Circuit 3.0
pH Circuit 3.1
pH Circuit 3.2
pH Circuit 4.0
You might also be interested in:
Atlas Scientific Conductivity Kit
Atlas Scientific ORP Kit
Atlas Scientific Dissolved Oxygen Kit
Atlas Scientific SDS Kit
Conductivity Kit
Dissolved Oxygen Kit
3+ units
10+ units
20+ units
AtlasScientific Recommends
Sensor Pipe Fitting
BNC Extension
Arduino Rapid
Development Shield
Raspberry Pi Rapid
Development Shield
Sensor Pipe Fitting Size