EZO™ RTD Temperature Circuit
You may also like…
4+ Units |
$33.99 |
10+ Units |
$29.99 |
25+ Units |
$27.99 |
50+ Units |
$24.99 |
100+ Units |
$19.99 |
- Arduino Uno Sample Code
- Arduino Mega Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code (UART, I2C, USB)
There is no shortage of temperature probes out there, and the most accurate of all is the platinum RTD probe. But, converting the resistance of platinum to an actual temperature is unusually complicated. Fortunately, the Atlas Scientific EZO-RTD Circuit makes taking high accuracy readings from a platinum RTD probes easy. The EZO-RTD Circuit can work with any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.
RTD
Resistance Temperature Detector
Reads
Temperature
Range
-126.000 °C − 1254 °C
Resolution
0.001
Accuracy
+/– (0.1 + 0.0017 x ̊C) Response time
1 reading per sec
Supported probes Any type & brand PT-100
or PT-1000 RTD
Calibration
Single point
Temperature output
°C, °K, or °F
Data protocol
UART & I2C
Default I2C address
102 (0x66)
Operating voltage
3.3V − 5.5V
Data format
ASCII
Onboard Data Logger 50 Readings
Electrical Isolation not needed Circuit dimensions 13.97mm x 20.16mm (0.55″ x 0.79″)
Weight 1.76 grams
- Arduino Uno Sample Code
- Arduino Mega Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code (UART, I2C, USB)
There is no shortage of temperature probes out there, and the most accurate of all is the platinum RTD probe. But, converting the resistance of platinum to an actual temperature is unusually complicated. Fortunately, the Atlas Scientific EZO-RTD Circuit makes taking high accuracy readings from a platinum RTD probes easy. The EZO-RTD Circuit can work with any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.
RTD
Resistance Temperature Detector
Reads
Temperature
Range
-126.000 °C − 1254 °C
Resolution
0.001
Accuracy
+/– (0.1 + 0.0017 x ̊C) Response time
1 reading per sec
Supported probes Any type & brand PT-100
or PT-1000 RTD
Calibration
Single point
Temperature output
°C, °K, or °F
Data protocol
UART & I2C
Default I2C address
102 (0x66)
Operating voltage
3.3V − 5.5V
Data format
ASCII
Onboard Data Logger 50 Readings
Electrical Isolation not needed Circuit dimensions 13.97mm x 20.16mm (0.55″ x 0.79″)
Weight 1.76 grams