Conductivity Probe K 0.1


You may also like…


Add & Save

4+ units


10+ units


25+ units


Conductivity Probe K 0.1

Over the years, we have tested an endless number of conductivity probe designs. Our research has shown us that not all conductivity probes are the same. Many lower-quality probes are susceptible to “fringe effect,” which makes the readings change when the probe is near an object. This effect makes it very difficult to take accurate readings. The Atlas Scientific line of conductivity probes has been designed to provide stable and precise readings free of fringe effect over a broad conductivity range. 

Because conductivity probes don’t have any electrolyte that gets depleted, they only need to be calibrated during installation.

Range0.07 − 50,000 μS/cm
Accuracy+/ – 2%
Response time90% in 1s
Temperature range °C1 − 110 °C
Max pressure3,447 kPa (500PSI)
Max depth343 meters (1,125 ft)
ConnectorMale SMA / Male BNC
Cable length1 meter
Internal temperature sensorNo
Time before recalibration~10 years
Life expectancy~10 years

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.