EZO™ Embedded Flow Meter Totalizer
#EZO-FLOW
You may also like…
-
-
New!
Add & Save
|
4+ Units |
$43.70 |
|
10+ Units |
$42.55 |
|
25+ Units |
$41.40 |
Arduino Uno Sample Code- Arduino Mega / Giga Sample Code
- Arduino I²C Sample Code
Raspberry Pi Sample Code (UART, I²C, USB)
Reading the signal from a flow meter is easy; until you actually try and do it. A few missed pulses here and there leads to massive inaccuracies over a relatively short time. To accurately read and totalize flow rate, a subsystem must be used that has been specifically designed to do just that (hint don’t use your CPU to totalize flow; it’s busy doing other things).
The EZO-Flow can be used with your own pulsed D.C. flow meter, or it can be connected to one of the flow meters we offer.
| Reads | Total flow and flow rate |
| Preprogrammed | Works with all Atlas Scientific flow meters |
| Programmable | Can work with most off-the-shelf flow meters |
| Visual display | Real time turbine rotation |
| Data protocol | UART & I2C |
| Default I2C address | 104 (0x68) |
| Operating voltage | 3.3V − 5V |
| Data format | ASCII |
| Circuit dimensions | 13.97mm x 20.16mm (0.55″ x 0.79″) |
| Weight | 1.76 grams |
You may also like…
-
-
New!
