
Wi-Fi Pool Kit
You may also like…
4+ Units |
$418.95 |
10+ Units |
$407.90 |
25+ Units |
$396.90 |
The Wi-Fi Pool Kit reads pH, ORP, and temperature. The pH readings are automatically temperature compensated and uploaded to ThingSpeak, which allows for remote readings on a phone, tablet or PC. The code and instructions are available in the download section of this page.
The Wi-Fi Pool Kit comes with:
1x Enclosure with hardware assembled within
1x EZO pH circuit
1x EZO ORP circuit
1x EZO RTD Temperature circuit
1x Consumer grade pH probe
1x Consumer grade ORP probe
1x PT-1000 temperature probe
OR
1x Industrial pH/ORP/Temp probe
2x 20ml ORP 225mV calibration solution pouches
6x 20ml calibration solution pouches (2x pH 4, 2x pH 7 and 2x pH 10)
• No soldering required • No programming necessary
• Automatically uploads data to ThingSpeak cloud
• Access to data on phone, tablet or PC
• Auto temperature compensation for pH
• Pre-drilled / wall mountable case with clear top
• pH range 0 − 14 / resolution 0.01
• ORP range +/-1100mV • Operating voltage : 5V • Current consumption : 280mA at 5V • Three electrically isolated slots (pH, ORP and AUX) • One auxiliary (AUX) slot for an additional sensor • Calibration solutions included. • IP64 (dust and water splash proof) • I2C mode only
The Wi-Fi Pool Kit reads pH, ORP, and temperature. The pH readings are automatically temperature compensated and uploaded to ThingSpeak, which allows for remote readings on a phone, tablet or PC. The code and instructions are available in the download section of this page.
The Wi-Fi Pool Kit comes with:
1x Enclosure with hardware assembled within
1x EZO pH circuit
1x EZO ORP circuit
1x EZO RTD Temperature circuit
1x Consumer grade pH probe
1x Consumer grade ORP probe
1x PT-1000 temperature probe
OR
1x Industrial pH/ORP/Temp probe
2x 20ml ORP 225mV calibration solution pouches
6x 20ml calibration solution pouches (2x pH 4, 2x pH 7 and 2x pH 10)
• No soldering required • No programming necessary
• Automatically uploads data to ThingSpeak cloud
• Access to data on phone, tablet or PC
• Auto temperature compensation for pH
• Pre-drilled / wall mountable case with clear top
• pH range 0 − 14 / resolution 0.01
• ORP range +/-1100mV • Operating voltage : 5V • Current consumption : 280mA at 5V • Three electrically isolated slots (pH, ORP and AUX) • One auxiliary (AUX) slot for an additional sensor • Calibration solutions included. • IP64 (dust and water splash proof) • I2C mode only