EZO-RGB™ Embedded Color Sensor – Plastic Body

#EZO-RGB-P
New!
New!

You may also like…

$62.99 USD

Add & Save

4+ Units

$60.00

10+ Units

$58.25

25+ Units

$56.75

With your smartphone’s high-definition camera, accurately capturing a color in 8-Bit RGB or CIE might seem straightforward, but it’s quite intricate. The Atlas Scientific EZO-RGB-P sensor, however, simplifies this task. Housed in durable, weather-resistant photosensitive resin body with versatile mounting options, integrated illuminator LEDs, and an easy-to-use data protocol, this sensor brings sophisticated color detection to an accessible level.

The EZO-RGB-P™ comes with:
One embedded color sensor with plastic body, one data cable with 5 pin male header, and one Locknut & O-ring.

ReadsRGB (24-bit)
CIE (xyY)
LUX (0 – 65535)
Features Onboard LEDs
Programmable color matching
Body materialBlack – Photosensitive Resin
Connector5 lead data cable
Response time 400ms
Sensing area 15° half angle
Cable length 1 meter
Water resistant/dust proof IP67 (waterproof up to 1 meter)
Data protocol UART & I2C
Default I2C address 112 (0x70)
Data format ASCII
Operating voltage3.3V − 5V

With your smartphone’s high-definition camera, accurately capturing a color in 8-Bit RGB or CIE might seem straightforward, but it’s quite intricate. The Atlas Scientific EZO-RGB-P sensor, however, simplifies this task. Housed in durable, weather-resistant photosensitive resin body with versatile mounting options, integrated illuminator LEDs, and an easy-to-use data protocol, this sensor brings sophisticated color detection to an accessible level.

The EZO-RGB-P™ comes with:
One embedded color sensor with plastic body, one data cable with 5 pin male header, and one Locknut & O-ring.

ReadsRGB (24-bit)
CIE (xyY)
LUX (0 – 65535)
Features Onboard LEDs
Programmable color matching
Body materialBlack – Photosensitive Resin
Connector5 lead data cable
Response time 400ms
Sensing area 15° half angle
Cable length 1 meter
Water resistant/dust proof IP67 (waterproof up to 1 meter)
Data protocol UART & I2C
Default I2C address 112 (0x70)
Data format ASCII
Operating voltage3.3V − 5V

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.