-
-
Wi-Fi Hydroponics Kit
- Conductivity Probe Type:
K 1.0 - 5 to 200,000 µS/cm
- pH Probe Type:
Consumer Grade pH Probe
-+ -
-
Subtotal: $1,075.97
EZO-HUM™ Embedded Humidity Probe – Plastic Body
#EZO-HUM-P-P
You may also like…
Add & Save
|
4+ Units |
$52.25 |
|
10+ Units |
$50.85 |
|
25+ Units |
$49.50 |
Arduino Uno Sample Code- Arduino Mega / Giga Sample Code
- Arduino I2C Sample Code
Raspberry Pi Sample Code (I2C)
This probe comes fully calibrated and ready to use right out of the box.
The EZO-HUM-P-P™ comes with:
One embedded Humidity probe with plastic body, one data cable with 5 pin male header, and one Locknut & O-ring.
Reads Relative humidity (RH) Dew point
Air temperature Range 0 – 100% RH Calibration Factory calibrated Response time 1 reading per second
(UART mode) 1 reading per 300 milliseconds
(I2C mode) Accuracy +/- 2% of reading from 5-95% RH Body material 9000R – Photosensitive resin Connector 5 lead data cable Cable length 1 meter Data protocol UART & I2C Default I2C address 111 (0x6F) Data format ASCII Operating voltage 3.3V − 5V IP rating IP67 (waterproof up to 1 meter) NEMA rating 6P Life expectancy 10 years