EZO-CO2™ Embedded Carbon Dioxide Sensor
#EZO-CO2
You may also like…
-
-
-
-
New!
Add & Save
|
4+ Units |
$171.00 |
|
10+ Units |
$166.50 |
|
25+ Units |
$162.00 |
Arduino Uno Sample Code- Arduino Mega Sample Code
- Arduino I2C Sample Code
Raspberry Pi Sample Code (I2C)
With all the talk of Co2 these days, you would think it’s easy to detect.
But Co2 only consists of 0.04% of the atmosphere meaning; it’s a trace gas that’s quite difficult to detect. The Atlas Scientific EZO-CO2 sensor is a compact Non-Dispersive Infrared (NDIR) sensor that gets right to the point, giving you the Co2 readings in ppm. With internal temperature and humidity compensation, the Atlas Scientific EZO-CO2 sensor easily brings advanced sensing to your next project.
The EZO-CO2™ comes with:
One embedded carbon dioxide sensor, one data cable with 5 pin male header, and one Locknut & O-ring
Reads
Gaseous CO2
Range
0 − 10,000 ppm
Calibration
Factory calibrated
Pressure Atmosphere only Response time
1 reading per second
Resolution
1 ppm
Accuracy
(+/- 5%) + (+/- 50 ppm)
Connector
5 lead data cable
Warmup time
10 seconds
Cable length
1 meter
Data protocol
UART & I2C
Default I2C address
105 (0x69)
Data format
ASCII
Operating voltage
3.3V − 5V
Life expectancy ~5.5 years
- Arduino Uno Sample Code
- Arduino Mega Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code (I2C)
With all the talk of Co2 these days, you would think it’s easy to detect.
But Co2 only consists of 0.04% of the atmosphere meaning; it’s a trace gas that’s quite difficult to detect. The Atlas Scientific EZO-CO2 sensor is a compact Non-Dispersive Infrared (NDIR) sensor that gets right to the point, giving you the Co2 readings in ppm. With internal temperature and humidity compensation, the Atlas Scientific EZO-CO2 sensor easily brings advanced sensing to your next project.
The EZO-CO2™ comes with:
One embedded carbon dioxide sensor, one data cable with 5 pin male header, and one Locknut & O-ring
Reads
Gaseous CO2
Range
0 − 10,000 ppm
Calibration
Factory calibrated
Pressure Atmosphere only Response time
1 reading per second
Resolution
1 ppm
Accuracy
(+/- 5%) + (+/- 50 ppm)
Connector
5 lead data cable
Warmup time
10 seconds
Cable length
1 meter
Data protocol
UART & I2C
Default I2C address
105 (0x69)
Data format
ASCII
Operating voltage
3.3V − 5V
Life expectancy ~5.5 years
You may also like…
-
-
-
-
New!
