
EZO-HUM™ Embedded Humidity Probe – Stainless Steel Body
You may also like…
4+ Units |
$99.75 |
10+ Units |
$97.00 |
25+ Units |
$94.50 |
From industrial processes to environmental monitoring, this humidity probe can be used in countless applications. Our stainless steel Humidity Probe is versatile and durable; Ideal for both indoor and outdoor humidity monitoring. The EZO Embedded Humidity Probe gives the same readings as our EZO-HUM Circuit. There is no difference in the readings or accuracy, only the design.
This probe comes fully calibrated and ready to use right out of the box.
The EZO-HUM-P-S™ comes with:
One embedded Humidity probe with stainless steel body, one data cable with 5 pin male header, and one Locknut & O-ring.
Reads Relative humidity (RH) Dew point
Air temperature Range 0 – 100% RH Calibration Factory calibrated Response time 1 reading per second
(UART mode) 1 reading per 300 milliseconds
(I2C mode) Accuracy +/- 2% of reading from 5-95% RH Body material 316 stainless steel
Connector 5 lead data cable Cable length 1 meter Data protocol UART & I2C Default I2C address 111 (0x6F) Data format ASCII Operating voltage 3.3V − 5V IP rating IP67 (waterproof up to 1 meter) NEMA rating 6P Life expectancy 10 years