No products in the cart.
Add & Save
Here at Atlas Scientific, we need very accurate humidity monitoring.
If the humidity is too high, we can’t manufacture sensors; if it’s too low static electricity becomes an issue. Finding a high-quality humidity sensor was harder than we thought. So, we built our own. These sensors can be found all over our lab to make sure the humidity is always kept within range. We love them, and we believe you will too.
The EZO-HUM™ comes with:
One embedded Humidity sensor, and one data cable with 5 pin male header.
|Range||0 – 100%|
|Response time||1 reading per second (UART mode)|
|1 reading per 300 milliseconds (I2C mode)|
|Connector||5 lead data cable|
|Cable length||1 meter|
|Data protocol||UART & I2C|
|Default I2C address||111 (0x6F)|
|Operating voltage||3.3V − 5V|
|IP rating||IP67 (waterproof up to 1 meter)|
|Life expectancy||10 years|