No products in the cart.
Add & Save
The Atlas Scientific Micro-pH Probe was designed for microfluidics and other small applications. Because the probe is so small, it had to be built as a half cell pH probe. A ½ cell probe works just like a normal pH probe, but it consists of two separate pieces, the working electrode and the reference electrode. The supplied connector board merges the two halves into one, just like a normal pH probe.
|• 1 Micro pH Probe|
|• 1 Micro Reference Probe|
|• 1 Half Cell SMA Breakout Board|
|Silver / silver chloride|
|Range||0 − 14|
|Response time||95% in 1s|
|Temperature range °C||-5 − 90 °C|
|Max pressure||150 PSI|
|Max depth||60m (197 ft)|
|Cable length||61cm (2′)|
|Internal temperature sensor||No|
|Time before recalibration||~1 month|
|Life expectancy||~6 − 12 months|