EZO™ Humidity Circuit
#EZO-HUM-C
You may also like…
Add & Save
|
4+ Units |
$31.35 |
|
10+ Units |
$30.50 |
|
25+ Units |
$29.70 |
The EZO Humidity Circuit is designed to be embedded with your electronics, reading the humidity of your enclosure. While there is no reason it can’t read the humidity of a room, it lacks the housing needed to protect the electronics. The EZO Humidity circuit gives the same readings as our EZO-HUM Probe. There is no difference in the readings or accuracy, only the design.
Reads Relative humidity Dew point
Air temperature Range 0 – 100% Calibration Factory calibrated Accuracy +/- 2% Response time 1 reading per second
(UART mode) 1 reading per 300 milliseconds
(I2C mode) Data protocol UART & I2C Default I2C address 111 (0x6F) Data format ASCII Operating voltage 3.3V − 5V
The EZO Humidity Circuit is designed to be embedded with your electronics, reading the humidity of your enclosure. While there is no reason it can’t read the humidity of a room, it lacks the housing needed to protect the electronics. The EZO Humidity circuit gives the same readings as our EZO-HUM Probe. There is no difference in the readings or accuracy, only the design.
Reads Relative humidity Dew point
Air temperature Range 0 – 100% Calibration Factory calibrated Accuracy +/- 2% Response time 1 reading per second
(UART mode) 1 reading per 300 milliseconds
(I2C mode) Data protocol UART & I2C Default I2C address 111 (0x6F) Data format ASCII Operating voltage 3.3V − 5V
