-
EZO Complete-Dissolved Oxygen Kit
- Dissolved Oxygen Probe:
Lab Grade D.O. Probe (+$52)
- Certificate of Calibration:
No thank you
-+
Subtotal: $389.99
Surveyor™ Analog Dissolved Oxygen Meter
#SRV-DO
Patent Protected
You may also like…
Add & Save
|
4+ units |
$19.00 |
|
10+ units |
$18.50 |
|
25+ units |
$18.00 |
Dissolved Oxygen | Common Mistakes | Air Bubble- Dissolved Oxygen | Common Mistakes | Stagnant vs Moving Water
- Dissolved Oxygen | Common Mistakes | Damaged Membrane
(Previously known as the Gravity Dissolved Oxygen Meter )
Although Dissolved Oxygen is a complex measurement, it doesn’t always have to be. Some applications only need to know the presence of oxygen in percent saturation. If you are looking for basic measurements that you can rely on, The Atlas Scientific Surveyor™ Dissolved Oxygen Meter is your solution. This device outputs an analog voltage from 10mV – 1,000mV and gives D.O. readings in percent saturation only.
Reads Dissolved Oxygen
Range 0 − 700% saturation
Accuracy +/– 2%
Response time
Continuous analog output
Supported probes
Any galvanic probe
Calibration Optional Temp. compensation
No (unnecessary)
Data protocol Analog ~0 − ~3,000mV Surveyor™ dimensions
56.2mm x 32mm (2.2″ x 1.2″)
Weight: 15 grams The Surveyor™ Analog Dissolved Oxygen Meter
comes with (4) standoffs and screws,
(1) 3 pin jumper cable
