Surveyor™ Analog Dissolved Oxygen Meter
#SRV-DO
You may also like…
Add & Save
|
4+ units |
$19.00 |
|
10+ units |
$18.50 |
|
25+ units |
$18.00 |
Dissolved Oxygen | Common Mistakes | Air Bubble- Dissolved Oxygen | Common Mistakes | Stagnant vs Moving Water
- Dissolved Oxygen | Common Mistakes | Damaged Membrane
(Previously known as the Gravity Dissolved Oxygen Meter )
Although Dissolved Oxygen is a complex measurement, it doesn’t always have to be. Some applications only need to know the presence of oxygen in percent saturation. If you are looking for basic measurements that you can rely on, The Atlas Scientific Surveyor™ Dissolved Oxygen Meter is your solution. This device outputs an analog voltage from 10mV – 1,000mV and gives D.O. readings in percent saturation only.
| Reads | Dissolved Oxygen |
| Range | 0 − 700% saturation |
| Accuracy | +/– 2% |
| Response time | Continuous analog output |
| Supported probes | Any galvanic probe |
| Calibration | Optional |
| Temp. compensation | No (unnecessary) |
| Data protocol | Analog ~0 − ~3,000mV |
| Surveyor™ dimensions | 56.2mm x 32mm (2.2″ x 1.2″) |
| Weight: | 15 grams |
| The Surveyor™ Analog Dissolved Oxygen Meter comes with (4) standoffs and screws, (1) 3 pin jumper cable |
