Gravity™ Analog pH Sensor / Meter
#GRV-pH
Patent Protected
You may also like…
Add & Save
|
4+ units |
$23.75 |
|
10+ units |
$23.10 |
|
25+ units |
$22.50 |
If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Gravity pH meter might be for you. Simple to use and straight to the point, the Atlas Scientific Gravity pH meter outputs an analog signal that’s easy to read.
Reads pH Range 0.1 − 14.0 Resolution 0.1 Accuracy +/– 0.2 Response Time Continuous analog output
Supported probes
Any type & brand
Calibration Optional Temp Compensation. No (unnecessary)
Data Protocol Analog 2.7 − 0.2V Dimensions 56.2mm x 32mm (2.2″ x 1.2″)
Weight 15 grams The Gravity™ Analog pH Sensor / Meter
comes with (4) standoffs and screws,
(1) 3 pin jumper cable
If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Gravity pH meter might be for you. Simple to use and straight to the point, the Atlas Scientific Gravity pH meter outputs an analog signal that’s easy to read.
Reads pH Range 0.1 − 14.0 Resolution 0.1 Accuracy +/– 0.2 Response Time Continuous analog output
Supported probes
Any type & brand
Calibration Optional Temp Compensation. No (unnecessary)
Data Protocol Analog 2.7 − 0.2V Dimensions 56.2mm x 32mm (2.2″ x 1.2″)
Weight 15 grams The Gravity™ Analog pH Sensor / Meter
comes with (4) standoffs and screws,
(1) 3 pin jumper cable
