Surveyor™ Analog pH Sensor / Meter

#SRV-pH
Patent Protected

You may also like…

$24.99 USD

Add & Save

4+ units

$23.75

10+ units

$23.10

25+ units

$22.50

(Previously known as the Gravity Analog pH Sensor / Meter)

If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Surveyor™ pH meter might be for you. Simple to use and straight to the point, the Atlas Scientific Surveyor™ pH meter outputs an analog signal that’s easy to read.

ReadspH
Range0.1 − 14.0
Resolution0.1
Accuracy+/– 0.2
Response TimeContinuous analog output
Supported probes Any type & brand
CalibrationOptional
Temp Compensation.No (unnecessary)
Data ProtocolAnalog 2.7 − 0.2V
Dimensions54mm x 32mm (2.2″ x 1.2″)
Weight15 grams
The Surveyor™ Analog pH Sensor / Meter
comes with (4) standoffs and screws,
(1) 3 pin jumper cable

(Previously known as the Gravity Analog pH Sensor / Meter)

If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Surveyor™ pH meter might be for you. Simple to use and straight to the point, the Atlas Scientific Surveyor™ pH meter outputs an analog signal that’s easy to read.

ReadspH
Range0.1 − 14.0
Resolution0.1
Accuracy+/– 0.2
Response TimeContinuous analog output
Supported probes Any type & brand
CalibrationOptional
Temp Compensation.No (unnecessary)
Data ProtocolAnalog 2.7 − 0.2V
Dimensions54mm x 32mm (2.2″ x 1.2″)
Weight15 grams
The Surveyor™ Analog pH Sensor / Meter
comes with (4) standoffs and screws,
(1) 3 pin jumper cable

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.