EZO-O2™ Embedded Oxygen Sensor – Stainless Steel Body
#EZO-O2-S
You may also like…
-
-
-
-
New!
Add & Save
|
4+ Units |
$142.50 |
|
10+ Units |
$138.75 |
|
25+ Units |
$135.00 |
Arduino Uno Sample Code- Arduino Mega Sample Code
- Arduino I2C Sample Code
Raspberry Pi Sample Code (I2C)
The EZO-O2-S™ comes with:
One embedded oxygen sensor with stainless steel body, one data cable with 5 pin male header, and one Locknut & O-ring.
Reads Gaseous O2 Range 0 – 42%
(2x atmospheric O2 levels) Calibration Factory calibrated Pressure Atmosphere only Response time 1 reading per second Resolution 0.01 Accuracy +/- 0.01%
(0.2 PPT)Body material 316 Stainless Steel
Connector 5 lead data cable Cable length 1 meter Data protocol UART & I2C Default I2C Address 108 (0x6c) Data format ASCII Operating voltage 3.3V – 5V Life expectancy ~3.5 years
- Arduino Uno Sample Code
- Arduino Mega Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code (I2C)
The EZO-O2-S™ comes with:
One embedded oxygen sensor with stainless steel body, one data cable with 5 pin male header, and one Locknut & O-ring.
Reads Gaseous O2 Range 0 – 42%
(2x atmospheric O2 levels) Calibration Factory calibrated Pressure Atmosphere only Response time 1 reading per second Resolution 0.01 Accuracy +/- 0.01%
(0.2 PPT)Body material 316 Stainless Steel
Connector 5 lead data cable Cable length 1 meter Data protocol UART & I2C Default I2C Address 108 (0x6c) Data format ASCII Operating voltage 3.3V – 5V Life expectancy ~3.5 years
You may also like…
-
-
-
-
New!
