Sensor Bridge

#SN-BG

$9.99 USD

Add & Save

4+ units

$9.50

10+ units

$9.25

25+ units

$9.00

The Atlas Scientific Sensor Bridge allows you to connect 4 more sensors or pumps to your system. Wire your power, ground, and I2C directly into the screw terminals, and your sensors into the header pins. This board includes pull-up resistors, which are for proper I2C transmission. If you are using more than 1 of the same sensor/pump, be sure to change its I2C address.

The Sensor Bridge was designed to work with the following products:

EZO-Co2
EZO-HUM
EZO-O2
EZO-RGB
EZO-PMP
EZO-PMP-L

Add up to 4 pumps onto your system
Add up to 4 more sensors into your system.

The Atlas Scientific Sensor Bridge allows you to connect 4 more sensors or pumps to your system. Wire your power, ground, and I2C directly into the screw terminals, and your sensors into the header pins. This board includes pull-up resistors, which are for proper I2C transmission. If you are using more than 1 of the same sensor/pump, be sure to change its I2C address.

The Sensor Bridge was designed to work with the following products:

EZO-Co2
EZO-HUM
EZO-O2
EZO-RGB
EZO-PMP
EZO-PMP-L

Add up to 4 pumps onto your system
Add up to 4 more sensors into your system.

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.